Diaphragm Jig

Hongji Group Product Superiority

Diaphragm Jig is a new equipment, high performance and energy saving and environmental protection in the gravity separation, it is widely used in various kinds of minerals, the separation of gold, tungsten, tin, iron, titanium, manganese, chromium, sulfur, coal and diamonds and restore for a society has been from von slag smelting slag, the slag metal processing slag and the chromium stainless steel, and tailings.

Jig beneficiation belongs to trench sorting operation, which uses water as mineral medium, sorting based on the proportion difference of selected minerals and gangue, jigs mostly are diaphragm, stroke and stroke frequency can be flexibly adjusted according to the proportion of selected minerals.

Diaphragm Jig is fixed sieve formula, used for sorting metal ores, such as tungsten, gold-bearing sands, tin and other selected gravity beneficiation, both for the selection of fine materials and for coarse materials, the maximum feed size is 6-8mm, but in sorting placer individual cases, the maximum particle size is 12mm.

Diaphragm Jig consists of the jig body,valve, sieve, nesting devices and refuse dumping road . The jigger body has jigging chamber and air chamber. Jig is deep trough selected device. All jigger have jigging chamber. Indoor sieve jigging is made of the punching plate, woven mesh or iron bar grate, water flow through the sieve into the jigging chamber ,Letting the bed raise a bit height and keep in slightly loose state, the density of the particles settle into the bottom due to local pressure, low density particles are transferred to the upper. When the water falls, the density of the small particles can also gradually go through the close gap into the lower bed.

The Configuration and Price of Diaphragm Jig

Hongji Group is a professional Diaphragm Jig manufacturer, which has a long history in the production of Diaphragm Jig. Different models of Diaphragm Jig have different prices. If you want to know the latest information about the selection and design of Hongji Diaphragm Jig, please leave us a message or send us emails!

, , ,

Specification	Numberof  chamber	Number of screen(m3)	Feeding size(mm)	Capacity(t/h)	Stroke(mm)	Frequency(/min)	Addition of water(kg/m2)	Motor		Weight(t)
								Type	Power(kw)
100x150 Diaphragm Jig	1	0.015	-3	0.018-0.6	-	420	-	Y80L-4	0.55	130
300x450 Two-Room Diaphragm Jig	2	0.27	-12	3-6	0-26	322	2-4	Y90S-4	1.1	745
1000x1000 Underside Acting Cone Jig	2	2.	1-5	10-25	0-26	200-350	60-80	Y100L-6	1.5	1700
370x360 Underside Acting Cone Diaphragm Jig	2	0.274	6	6	5-25	200-250	2-5	Y90SL2-4	1.1	240
Trapezoid Diaphragm Jig	3	2.7	-3	-3	13-21	170-230	60-90	Y90SL3-4	1.1	2000

 

RIGHT: rgb(0,0,0) 0.75pt outset; PADDING-TOP: 0pt; mso-border-left-alt: none; mso-border-right-alt: 0.7500pt outset rgb(0,0,0); mso-border-top-alt: 0.7500pt outset rgb(0,0,0); mso-border-bottom-alt: 0.7500pt outset rgb(0,0,0)" vAlign=center width=48>

13-21

170-230

60-90

Y90SL3-4

1.1

2000

 

RIGHT: rgb(0,0,0) 0.75pt outset; PADDING-TOP: 0pt; mso-border-left-alt: none; mso-border-right-alt: 0.7500pt outset rgb(0,0,0); mso-border-top-alt: 0.7500pt outset rgb(0,0,0); mso-border-bottom-alt: 0.7500pt outset rgb(0,0,0)" vAlign=center width=48>

13-21

170-230

60-90

Y90SL3-4

1.1

2000